Технические характеристики
2K UP-Glass fibre putty for filling of large damaged areas, rust perforations. Good adhesion on metal surfaces — also on wood, plastics and concrete.
Application:
Excellent adhesion on bare metal, wood, concrete, glass-fibre reinforced plastics, etc. • for filling of large damaged areas, rust, perforations, and imperfections • the special formulation of the polyester resins provides excellent adhesion also on surfaces which are affected by extension and strain
Technical data:
Pot life: 70 °F (20 °C): approx. 6 to 8 minutes • flash point: approx. 33 °C • density at 70 °F (20 °C): 1.6 g/cm³ • hardener: 2.5 % • temperature resistance of the cured material up to 120 °C • sanding after approx. 10 to 20 minutes • resistant against: solvents, propellants, acid, base, humidity, and road salt • no differentiation for following surfaces necessary: galvanic zinc-coated, hot-dip galvanised or aluminium
Important:
Shelf life: 24 months at 70 °F (20 ºC) • notice EU-safety data sheet as well as handling and warning notices on the label