Технические характеристики
Application:
Black wiping filler for porous CRP-surfaces (to seal pinholes)
Technical data:
Density: approx. 1.83 g/cm³
Thinner: on demand with acetone
Drying/curing: could be wiped off at 20 °C in 20 minutes, at 40 °C in 10 minutes
Processing:
Apply with a cotton cloth or sponge. Surfaces to be coated must be clean and sanded before with 240 grit sandpaper, remove dust with compressed air and acetone. After drying remove excess material with a "Scotch Pad" sanding sponge (or similar) at low pressure.
Don´t use solvents to clean the BascoFill-treated surface, only compressed air and an anti-static cloth were used to remove the “abrasive dust”.
Then paint with BascoPrime and BascoClear glossy or matt (see R&G product range).
Storage: 12 months at +10 up to +30 °C
Further information eWiki
