Mould Resin P (single components)

Технические характеристики

• Hard elastic, good edge strength
• Good grinding and polishing properties
• Thixotropic (non-drip)
• Manufactured in vacuum, so optimally free of air bubbles and homogeneous

This two-component epoxy resin is coloured black for Gelcoats (applied thickness 0.5–1 mm) in mould construction with high edge strength and good polishing properties. Mould resin P is processed and cured at room temperature in conjunction with epoxy resin laminates and laminating ceramics. In contrast to resin and metal systems, the surfaces are polishable.
The Gelcoat is hard-elastic, i.e. not brittle, and exhibits good edge strength.

Consumption: approx. 0.5–1 kg/m²

Processing:

EPH 573 hardener:
15 minutes processing time yielding surfaces resistant to styrene

EPH 161 hardener:
90 minutes processing time for enhanced heat distortion properties, surfaces not resistant to styrene

Hardener P:
30 minutes processing time yielding surfaces resistant to styrene

PoxySystems® is a registered trademark of R&G