Tool-cast Resin P + Hardener G (set of two components)
Технические характеристики
Black coloured epoxy resin for solid tools manufactured by casting method.
- Pourable, good degassing
- Easy to grind and polish
- Produced under vaccum, therefore air bubble-free and homogeneous
- For dimensionally stable molds and toolings
Tool-cast resin P and hardener G are processed and cured at room temperature.
Mixing ratio: 100 : 25 parts by weight tool-cast resin P : hardener G
Proccessing time: approx. 15 hours
Curing time: 24–48 hours/20 °C
Processing:
Resin and hardener are homogenized at room temperature (20–25 °C) for about 2 minutes. After mixing, leave the mixture for 20 minutes, then mould.
Let the fresh potting for 48 hours on a flat surface. Please do not touch and do not move.
An initial 500 g can be cast per mould without the surface collapsing. Coats up to 50 mm are possible with larger initial quantities.
Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction).
PoxySystems® is a registered trademark of R&G
