EP-Gelcoat colourless + Hardener L (set of two components)

Технические характеристики

EP-Gelcoat colourless + Hardener L

Mixing ratio: 100 : 38 parts by weight of resin to hardener
Processing time: 40 minutes
Gelling time: approx. 3 hours at 20 °C
Curing time: 24 hours at 20 °C
Cold curing

New Quality: free of Nonyl phenol.

 

EP-Gelcoat colourless

• Colourless, mixes with EP colour pastes
• Thixotropic (non-drip)
• Manufactured in vacuum, so optimally free of air bubbles and homogeneous
• Not UV-resistant
• Could whiten under the influence of water

This colourless, non-drip formulation of overlay resin for gel coats (outer laminate layers) can be coloured with epoxy colour pastes.
Consumption approx. 0.3 kg/m²
Processing with hardener S (20 min), L (40 min), and EPH 161 (90 min, enhanced heat distortion temperature)

PoxySystems® is a registered trademark of R&G.