EP-Gelcoat colourless + Hardener EPH 161 (set)

Технические характеристики

EP-Gelcoat colourless

• Colourless, mixes with EP colour pastes
• Thixotropic (non-drip)
• Manufactured in vacuum, so optimally free of air bubbles and homogeneous
• Not UV-resistant
• Could whiten under the influence of water

This colourless, non-drip formulation of overlay resin for gel coats (outer laminate layers) can be coloured with epoxy colour pastes.
Consumption approx. 0.3 kg/m²
Processing with hardener S (20 min), L (40 min), and EPH 161 (90 min, enhanced heat distortion temperature)

EP-Gelcoat colourless + Hardener EPH 161
Mixing ratio: 100 : 24 parts by weight of resin to hardener
Processing time: 90 minutes
Gelling time: approx. 4 hours at 20 °C
Curing time: 24 hours at room temperature, followed by hot curing (together with the laminate) approx. 10 hours at 60 °C (recommended, but not compulsory)
Max heat distortion temperature after annealing (10 hours at 100 °C) approx. 130–140 °C (for short periods, permanent approx. 110 °C)

Previous brand name of hardener EPH 161 = Bakelite® VE 3261

PoxySystems® is a registered trademark of R&G